Prior Scientific LED Light Sources

BioVision Technologies offers the following range of Prior Scientific LED illumination products for brightfield and fluorescence microscopy applications:

Prior Scientific Logo

Lumen 100-LED Fluorescence Illumination System

The Lumen 100-LED illuminator provides advanced, high quality illumination for a wide range of fluorescence microscopy applications. A wide range of adaptors are available to connect the L100-LED to most upright and inverted microscopes. A broad array of LEDs covering wavelengths throughout the visible spectrum are available and are suitable for the majority of fluorophores used in fluorescence applications. A combiner is also available if two LEDs need to be used simultaneously. Excitation filters can be added to LEDs to further optimize the bandwidth for your specific application. 

Features

  • Precise intensity control in 1% increments
  • Up to 11 LED’s available (additional wavelengths to be added)
  • Adapters to fit all major microscope manufacturers
  • Long lifetime (25,000 operating hours)
  • Increased energy efficiency
  • Instant On/Off control
  • Direct coupling to fluorescence port to maximize light efficiency
  • Silent operation
  • No Mercury
  • No bulb replacement
  • No alignment necessary
  • USB control for OEM integration
Prior Scientific Lumen 100-LED light source
Prior Scientific Lumen 100-LED light source
Prior Scientific Lumen 100-LED controller
Prior Scientific Lumen 100-LED controller

Lumen 300-LED White Light Fluorescence Excitation Illumination System

The Lumen 300-LED is specifically designed to offer broad‐spectrum LED illumination for fluorescence applications. Fitting directly to most microscopes, the system is simple to install and use. Controlled by a manual keypad controller, the Lumen 300‐LED offers instant on/off operation via TTL, manual 0–100% intensity control in 1% increments and on/off control for each LED. An optional liquid light guide is available to keep the illumination source remote from the microscope. Providing 25,000+ hours of bulb life, the Lumen 300‐LED is an environmentally friendly illumination system that requires no special disposal regulations.

Users of triple multiband filter sets should be aware that DAPI is typically excited at longer violet wavelength (400 nm) than the common UV band (365 nm). To match these triple multiband filter sets, the Lumen 300‐LED in multiband ("MB") format should be specified.

KeyFeatures

  • Broad‐spectrum LED illumination for fluorescence applications
  • Direct fit to most microscopes
  • Simplicity of installation and use
  • Optional liquid light guide for keeping the source of illumination remote from the microscope

Environmentally friendly features

  • No Mercury
  • No special disposal regulations

Manual keypad controller features

  • Instant on/off operation via TTL
  • 0–100% intensity control in 1% increments.
  • Independent brightness and on/off control for each LED
Prior Scientific Lumen 300-LED light source
Prior Scientific Lumen 300-LED light source
Prior Scientific Lumen 300-LED controller
Prior Scientific Lumen 300-LED controller

Lumen 1600-LED Fluorescence Illumination System

The Lumen 1600‐LED offers individual control for 16 selectable wavelengths. With its unique 16 selectable LED wavelengths, the Lumen 1600‐LED is compatible with all simple and multiband filter sets. For the user who wants ease of use, the Lumen 1600‐LED has a “white light” mode with simple on/off and intensity buttons. Fitting directly to most microscopes the system enables for rapid switching between LED wavelengths to allow for capture of high speed events. The Lumen 1600‐LED is controlled via a manual keypad controller, TTL, and USB as well as analog input for dynamic intensity control. Excitation filters can be fitted in the optical path for controlled switching with no moving parts. Providing 25,000+ hours of bulb life, the Lumen 1600‐LED is an environmentally friendly illumination system that requires no special disposal regulations.

Features

  • 16 selectable wavelengths
  • Individual control of LED wavelengths
  • Long lifetime (25,000 operating hours)
  • TTL and USB interface with imaging software
  • Compatible with all single‐ and multi‐band filter sets
  • Analog input for dynamic intensity control
  • Stable and repeatable output
  • TTL all‐on and all‐off triggering
  • Fits all new and most modern microscopes
  • Quiet operation
Prior Scientific Lumen 1600-LED head
Prior Scientific Lumen 1600-LED head
Prior Scientific Lumen 300-LED control pod
Prior Scientific Lumen 1600-LED control pod

LDB100F Brightfield LED with 550nm Filter

The LDB100F with 550 nanometer filter in the light path eliminates any background fluorescence. The LDB100F Brightfield LED illuminator provides all the advantages of LED illumination in a flexible package that can be fitted to most modern upright and inverted microscope systems.

Features

  • 10,000 hours operating lifetime
  • Filter in for fluorescence applications eliminating unwanted background fluorescence
  • Filter out for brightfield applications, full spectrum
  • Fits most modern upright and inverted microscope systems
  • Replaces standard lamphouses
  • Choose between manual intensity, TTL control or on/off which eliminates the need for shutter mechanisms
  • Compatible with ProScan and OptiScan controllers
  • Adapters are available for most modern microscopes
  • Can be utilized as a stand alone light source
  • <140 microseconds on/off speed using TTL
Prior Scientific LDB100F
Prior Scientific LDB100F

LDBUSBTTL Adapter

The LDBUSBTTL adapter is a USB to TTL output converter that allows users to control simple devices such as TTL‐controlled shutters and transmitted LED light sources.

Features

  • Powered via USB
  • Includes a USB cable and a converter box with a female BNC
  • Maintained output of 0V/5V
  • Compatible with Prior Scientific LDB100 Brightfield LED
  • Compatible with Prior Scientific Lumen 200S
  • Compatible with third‐party shutter mechanisms
Prior Scientific LDBUSBTTL
Prior Scientific LDBUSBTTL

Need a product demo? Contact us.